Logout; Loop - Digital Equipment MUXserver 100 Reference Manual

5.14 LOGOUT
Use this command to log out a port.
LOGOUT logs out a port from the MUXserver 100 and disconnects any
ses-
sions associated with the port. When you log in again, the server resets the
port characteristics to those defined in its permanent database.
If
you enter only the keyword LOGOUT, the command affects only the port
you are using.
Syntax:
LOGOUT [PORT number]
where
PORT
Example:
specifies the port to be logged out. The number must be
in the range
1
to
17.
This parameter is privileged.
Local> LOG POR 1
The command logs out terminal
1
and disconnects all service sessions for the
terminal.
Normal Response: (on the logged out tenninal)
Local - 020- Logged out port 1
5.15 LOOP
Use this comnland to test the physical connections between the server and an-
other node on the Ethernet. This is a privileged command. The server trans-
mits a message indicating whether the test is successful.
The nodes in the loop test need not be service nodes. Also, the command per-
mits you to enlist the assistance of an intermediary node in testing the circuits.
Syntax:
LOOP addressl [HELP {TRANSMIT} ASSISTANT address2]
{RECEIVE}
{FULL}
30 CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS