Table of Contents
Advertisement
CHAPTER 5
MUXserver 100 COMMAND DESCRIPTIONS
This chapter is an alphabetical reference of all MUXserver 100 commands.
Chapters 2 and 3 provide guidelines for using some of the commands and for
setting various characteristics.
NOTE
Privileged commands can only be executed by means of the supervi-
sor port of the MUXserver 100, or by means of the remote console.
(See Chapter 3, Section 3.1.4, Remote Managenlent of the
MUXserver 100 (By Means of the Ethernet).)
In the syntax for MUXserver 100 cODlmands, a keyword is a word that appears
in uppercase letters. A parameter is an optional part of the syntax. A value is a
number or word that you specify. The preface discusses the conventions used in
the commands' syntax.
You can enter MUXserver 100 commands in either uppercase or lowercase
characters (or a combination of both), and command lines can be up
to
132
characters in length. You can type a c:ommand line on two terminal display
lines. Do not press < RET> or any other character at the end of the first ter-
minal line. Separate the words in a command line by one or more spaces.
CHAPTER 5 MUX!lerver 100 COMMAND DESCRIPTIONS
1
Advertisement
Table of Contents
