Table of Contents
Advertisement
5.40 STOP TEST PORT
Use this command to terminate test activity generated by the START TEST
PORT command. This is a privileged comnland.
If
the test involved the loopback function, the result of the test appears on the
privileged terminal (that is, supervisor port terminal or the remote console).
Syntax:
STOP TEST PORT number
where
number
Example:
specifies the terminal for which the command terminates
testing.
Local> STO TES PORT 3
This command stops TEST TERMINAL activity at terminal 3.
Normal Response:
Local -511- Test complet. 6000 bytes written,
o
error(s) detected
Error Response:
Local -732- Port 3 not under test
5.41 SYSTEM (Part of the Communications Sub-
directory)
This command is executed from the privileged communications sub-directory
(that is, in response to the COM> prompt) and is used to set the parameter
for the A and B synchronous composite ports. Table 5-1 lists these parameters,
their initial default values and allowed options.
64
CHAPTER 5 MUXserver
100
COMMAND DESCRIPTIONS
Advertisement
Table of Contents
