Show Server - Digital Equipment MUXserver 100 Reference Manual

This display tells you the following:
Position
Entry
Node
Request
indicates the position of the remote request in the server
queue. Entries are queued on a first-in-first-out basis.
is the entry identification number for the remote request.
is the name of the service node that sent the remote connec-
tion request to the server.
shows the server port identification (see Name: in the SHOW
PORTS FULL display). This corresponds to a device name
for the printer that is set up by the system manager of the
requesting service node.
5.33 SHOW SERVER
Use this command to display information about the MUXserver 100.
The command displays server characteristics that are stored in the server's
permanent and operational databases. The characteristics enclosed in parenthe-
ses are those in the permanent database. These values do not take effect until
the next server initialization.
The keyword SERVER in this command can be abbreviated to no fewer than
five characters (see the example below).
You can interrupt a SHOW SERVEFt display with [BREAK]. The local prompt
reappears.
Syntax:
SHOW SERVER
Example:
Local> SHO SERV
CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS 53