Table of Contents
Advertisement
DSRZA
MUXSERVER 100
nFFLINE DIAGNOSTIC
rest number «CR> to resume normal operat;on,
~C
to stop test)?
1
2
3
4
Restart;ng Network
Asynchronous port external test
Asynchronous ;nternal log;c test
Modem control test
5.43 ZERO COUNTERS
Use this command to reset the counters for the Ethernet, server, and termi-
nals. This is a privileged command.
ZERO COUNTERS does not zero the uptime counter in the SHOW SERVER
display. This is reset only after an initialization or power-up of the MUXserver
tOO.
Syntax:
ZERO [COUNTERS] [NODE node-name]
where
NODE-name
Example:
LOCAL> ZER
specifies that the counter values for transmissions be-
tween the server and the LAT services node node-name
are set to zero.
LOCAL> ZER NOD SALES 1
68
CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS
Advertisement
Table of Contents
