Communications - Digital Equipment MUXserver 100 Reference Manual

Example:
LocaL> BRa PORT 7 "Now Logged in"
This command sends the string in quotes to terminal 7.
Normal Response: (at terminal
7)
LocaL - 501 - From Port 2, John Jones
Now Logged in.
Error Response:
LocaL -611- Broadcast disabLed on terminaL 7
5.3 COMMUNICATIONS
Use this privileged command to gain access to the 'communications sub-
directory'. These commands are used exclusively for setting up and monitoring
the composite links and the remote DECmux
II
units.
Once this command is entered, you are in the communications sub-directory as
indicated by the 'COM>' prompt, and you have access to the sub-directory
commands listed as follows.
CONNECT
DISCONNECT
EXIT
HELP
MAP
MAPHELP
RESTART
SAVE
SHOW
STATUS
SYSTEM
TEST
You leave the communications sub-directory by typing EXIT in response to the
COM> prompt.
4 CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS