Table of Contents
Advertisement
7.2.1 TEST Command
The TEST command is used to put the DECmux II unit into Test mode. This
will suspend normal operation, and for this reason, the operatOJ; is warned of
this effect and asked to verify the operation, as shown below.
When maintenance mode is entered successfully the test menu will be dis-
played. The eight off-line tests are described in Sections 7.2.2.1 through
7.2.2.8.
To select a test, enter the number of the test from the menu when prompted
to do so.
To restart the systenl, type < RETURN> at the Test Menu. This will cause
the multiplexer to reinitialize.
Syntax:
TEST
Example:
SYS>TEST
WARNING - test;ng w;ll destroy all user l;nks end requ;re e OFMZA
restert.
Do you really want to test [NO]?N
SYS>TEST
WARNING - test;ng w;ll destroy all user l;nks and requ;re e OFMZA
restart.
Do you really want to test [NO]?Y
DFMZA
8 LINE STAT MUX
OFFLINE DIAGNOSTIC
Test number «CR> to resume normel operetion, AC to stop test)?
1
2
3
4
5
6
7
8
Bas;c opt;on test
Asynchronous port external test
Asynchronous ;nternal log;c test
Compos;te port external test
Compos;te port ;nternal log;c test
Broadcast test
Echo test
Modem control test
CHAPTER 7 DIAGNOSTICS
15
Advertisement
Table of Contents
