Help Command - Digital Equipment MUXserver 100 Reference Manual

6.3.5 HELP Command
The HELP command displays HELP text.
Syntax:
HELP
Example:
SYS>HELP
DFMZA Commands:
CONnect -Connects this terminal to a remote DFMZA
COPy
DISconnect
EXit
Help
Map
MaPHelp
PASSword
POrt
REStart
SAve
Show
STatus
SYstem
TEST
?
CTRL-C
SYS>
supervisor port
-Copies the latest port set up to all ports
-Reverse of connect
-Leave supervisory mode
-Display this text
-Display and change port mapping
-Instructions for use of Map command
-Change password
-Change port parameters, requires port number
or US" for supervisory port
-Restart multiplexer, for Master restarts the
whole nework
-Save port parameters, system parameters, and
port mapping in non-volatile memory
-Display port parameters
-Display system communications status
-Change system communications parameters
-Enter test mode
-Display allowed options
-Exit from current command to SYS prompt
CHAPTER 6 DECmux II OPERATION 9