Table of Contents
Advertisement
Examples:
Local>
Local>
Local>
HEL
HEL PORT
HEL SER
5.12 INITIALIZE
Use this command to reinitialize the server, perform an orderly shutdown of
normal operations, and execute one of several types of diagnostic
self~test.
This
is a privileged command.
The green light (LED) on the MUXserver 100 indicates the result of the
self~
test. When the
self~test
starts, the light is turned off. When the test is
com~
pleted, the light assumes one of the following states:
•
On continuously; the server passed the basic
self~test
and is running.
If
errors occurred, these will be displayed on the supervisor port
terminal.
•
Off; the
self~test
failed. A fatal hardware error was detected.
If
the value for COUNT is greater than 1, several repetitions of the
self~test
occur. The light reflects the most serious error condition detected in any of the
test events.
Syntax:
INITIALIZE [DELAY
~]
[DISABLE] [DIAGNOSE {BRIEF} [COUNT number]]
{FULL}
[LOOP
]
{NORMAL}
and
INITIALIZE CANCEL
where
DELAY
delays the beginning of initialization for the specified
number of rninutes. The MUXserver 100 prints
warning messages at regular intervals to alert
termi~
nal users. The value can range from 0 to 65535. The
default is one minute.
CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS
27
Advertisement
Table of Contents
