Backwards - Digital Equipment MUXserver 100 Reference Manual

If you enter a command incorrectly, one of the following error messages
appears:
Local -701- Command syntax error
Local -702- Keyword "word" not known or
ambiguou~
Local -703- Value invalid or out of range, "nnnnnn"
Local -704- Privileged command or option
Refer to Appendix A for an explanation of these error messages. Check the
command syntax and re-enter the command. Each of the following command
descriptions has the syntax for the command it describes.
It
also indicates
whether the entire command requires privileged status or whether individual
paranleters require privileged status.
The examples show the command with keywords abbreviated to three letters.
If
you wish, you can abbreviate keywords to fewer than three characters if the
word remains unique.
"Normal Response" shows an example of the message you normally receive
from the server when you enter the command.
If
there is no command re-
sponse, the Local> prompt indicates successful execution of the command.
"Error Response" lists examples of the possible messages you can receive if
the command does not execute successfully.
5.1 BACKWARDS
Use this command to resume the previous session.
The previous session is the session that appears at the bottom of the SHOW
SESSIONS display.
If you have only one active session, that session resumes, and message 102
appears. If you have two active sessions, your non-current session resumes.
Syntax:
BACKWARDS
Example:
Local> BACK
2 CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS