Part Removal And Replacement Procedures; Removing The 3½-Inch Diskette Drive; Figure 3 - 8 Replacing The 3½-Inch Diskette Drive - Digital Equipment PRIORIS HX MP Service Maintenance Manual

Digital PRIORIS HX MP Server Digital PRIORIS HX MP Server

Part Removal and Replacement Procedures

Removing the 3½-inch Diskette Drive
To remove the 3½-inch diskette drive:
1) Turn off the computer.
2) Disconnect external devices, ac power, and monitor power.
3) Unlock and remove side panels.
4) Disconnect power and ribbon cables.
5) Remove screws securing the diskette drive to chassis.
6) Slide the diskette drive out of the drive bay.
Figure 3 - 8 Replacing the 3½-inch Diskette Drive
MCS Logistics Engineering - Nijmegen MCS Logistics Engineering - Nijmegen
Service Procedures Service Procedures
43 43
P
R
I
O
R
I
S
H
X
M
P