Factory Default Settings - Digi TransPort User Manual

Factory Default Settings

The Administration – Factory Default Settings page allows you to reset the router's
configuration back to the factory defaults.
The router must be rebooted before the configuration changes take effect.
Keep network settings
Selecting this option will mean that certain network settings will be preserved and not
reverted back to the factory defaults.
The network settings that are preserved are:
• Ethernet 0 IP address
• Ethernet 0 Mask
• Ethernet 0 Gateway
• Ethernet 0 DHCP Client
• Ethernet 0 DNS Server
• Default Route 0 Interface
• PPP 1 Username
• PPP 1 Password
• PPP 3 Username
• PPP 3 Password
• Mobile APN
• Mobile SIM PIN
Restore
Clicking this button initiates a factory reset of the router.
Digi TransPort User Guide 520