Digi TransPort User Manual page 448

this in action is to issue the command to start the Python interpreter from a debug/CLI
terminal and note that the screen remains blank. Stop the interpreter (using the "exit()"
command), set this parameter to "ON" and re-issue the command to start the interpreter. This
time, the familiar Python welcome message and prompt should appear on the console.
Related CLI Commands
Entity
pycfg
pycfg
The following additional command line informational / debugging commands may be helpful
when developing Python scripts.
•
pycfg files
•
pycfg mem
•
pycfg scripts
Digi TransPort User Guide
Instance Parameter
0 modpath
0 stderr2stdout
which displays the status of any Python files.
which shows the memory useage for the router.
which shows the status of any scripts and change count.
Values
valid search path,
such as "mymod.py"
0,1
0 = Off
1 = On
Python Files
Equivalent Web Parameter
Module search path
Redirect the Python output to
debug
448