Digi TransPort User Manual page 255

Entity Instance
ike n
ike
ike n
ike n
ike n
IKE Responder command
This page displays the various parameters for IKE 0 when used in Responder mode.
Enable IKE Responder
This parameter allows the router to respond to incoming IKE requests.
Accept IKE Requests with
This parameter defines the settings that the router will accept during the negotiation
Encryption
This is the acceptable encryption algorithms.
Authentication
This is the acceptable authentication algorithms.
MODP Group between x and y
This is the acceptable range for MODP group.
Renegotiate after h hrs m mins s secs
Digi TransPort User Guide
Parameter
initialcontact
n keepph1
privrsakey
delmode
openswan
Values Equivalent Web Parameter
on, off Send INITIAL-CONTACT notifications
on, off Retain phase 1 SA after failed phase 2
negotiation
Filename RSA private key file
0 = Normal SA Removal Mode
1 = Remove
IKE SA when
last IPsec SA
removed
2 = Remove
IPsec SAs
when IKE SA
remove
3 = Both
on, off None. This enables support for
Openswan IKE implementations.
IPsec parameters
255