Digi TransPort User Manual page 544

Installing the driver file
If the connection is being created for direct local access using a COM port, you should set the
phone number to 123. This number will be intercepted by the unit and recognized as an attempt
to connect locally.
If the connection is being created for remote access, enter the correct ISDN telephone number
(including the area code) for the remote unit.
When you have done this click Next >. The final dialog screen will confirm that the connection has
been created and includes a check box to allow you to create a shortcut on your desktop if
necessary. Click on Finish to complete the task.
Configuring the New DUN Connection
The new DUN connection that you have just created may now be used to connect to the unit but
before you do this, you will need to check some of the configuration properties.
1. Click on the Start button and select Connect To > My Digi Router (substituting the connection
name you chose).
Digi TransPort User Guide 544