Digi TransPort User Manual page 566

13
14
15
16
17
18
19
20
21
22
Stored X.25 PAD profiles are held in non-volatile memory and will not be lost when the unit is
switched off.
When used in the format:
prof nn
the PROF command loads the stored profile specified by "nn".
RESET Send Reset Packet
RESET is used to issue a reset for the current call to the network. It does NOT clear the call but it
does return the network level interface to a known state by re-initializing all Level 3 network
control variables. All data in transit will be lost.
RPAR? Read Remote X.3 Parameters
RPAR? lists the current X.3 parameter settings for the remote system.
RSET Set Remote X.3 Parameters
RSET is used to set one or more X.3 parameters for the remote system. It is entered in the format:
RSET par #:value[,par #:value[,par #:value ...]]
SET Set Local X.3 Parameters
SET is used to set one or more of the local X.3 parameters for the duration of the current session.
The format of the command is:
SET par #:value[,par #:value[,par #:value ...]]
STAT Display Channel Status
STAT displays the current status for each logical channel indicating whether it is free or engaged.
For example:
stat
Digi TransPort User Guide
0 0 0 0
0 0 0 0
0 0 0 0
8 8 127 127
24 24 24 24
18 18 18 18
2 2 1 1
64 64 0 0
0 0 0 0
0 0 0 0
566