Digi TransPort User Manual page 83

This parameter controls which mobile technology will be used as the preferred system (2G/
3G). When set to Auto the wireless module will choose the fastest technology available. For
GSM: When set to GSM, the wireless module will try GSM (GPRS/EDGE) technology first. When
set to WCDMA, the wireless module will try WCDMA (UMTS/HSPA) technology first. For CDMA:
Select CDMA for 2G (1xRTT) or EVDO for 3G.
Related CLI Commands - SIM Slot 1 (PPP 1)
)
Entity
modemcc
modemcc
modemcc
modemcc
modemcc
modemcc
modemcc
modemcc
modemcc
modemcc
modemcc
modemcc
modemcc
Digi TransPort User Guide
Instance Parameter
0 puk
0 init_str
0 init_str1
0 init_str2
0 hang_str
0 posthang_str
0 intercall_idle
0 att_interval
0 link_retries
0 stat_retries
0 ss_interval
0 check_reg
0 psys
Values Equivalent Web Parameter
sim puk code SIM PUK/Confirm SIM PUK
Free text field Initialisation string 1
Free text field Initialisation string 2
Free text field Initialisation string 3
Free text field Hang-up string:
Free text field Post Hang-up string:
0 - 2147483647 Wait n seconds between
hanging up and allowing
another call
0 - 2147483647 Wait n seconds between
attachment attempts
0 - 2147483647 Reset the module after n
unsuccessful connection
attempts
0 - 2147483647 Reset the module after n
unsuccessful status retrieval
attempts
0 - 2147483647 Create a signal strength event
every n minutes
0,1,2 If registration is lost for 5
minutes
0 = do not reset the module
1 = reset the module if the GSM
registration is lost
2 = reset the module if the GPRS
registration is lost
0,1,2 Preferred System
0 = Auto
1 = GSM
2 = WCDMA
Mobile parameters
83