Digi TransPort User Guide
(Part number 90001019 L)
Revision
Date
A
February, 2009
B
February, 2009
C
April, 2009
D
October, 2009
E
May, 2005
F
March, 2012
G
May, 2012
H
August, 2012
K
April, 2013
L
February, 2015
Disclaimers
Information in this document is subject to change without notice and does not represent a commitment on
the part of Digi International. Digi provides this document "as is," without warranty of any kind, expressed
or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular
purpose. Digi may make improvements and/or changes in this manual or in the product(s) and/or the
program(s) described in this manual at any time.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and
other countries worldwide. All other trademarks mentioned in this document are the property of their
respective owners.
© 2015 Digi International. All rights reserved.
Customer support
If you need assistance, contact technical support:
Telephone (8:00 am - 5:00 pm—U.S. Central Time):
866.765.9885 toll-free U.S.A. & Canada
801.765.9885 Worldwide
Fax: 952.912.4952
Online:
www.digi.com/support/eservice/
Mail:
Digi International
11001 Bren Road East
Minnetonka, MN 55343 USA
Description
Initial Release
Added bug fixes
Revised with firmware updates
Revised with firmware updates
Added minor changes
Changed default IP address and added temperature monitoring section
Updated autosa and ouridtype parameters
Added GPIO section
Added several new commands including network status commands, GOBI
image load selection and MultiTX
Added PPP CLI commands and fixed errors
Need help?
Do you have a question about the TransPort and is the answer not in the manual?
Questions and answers