Realport Parameters - Digi TransPort User Manual

The parameter in this text entry box is the ASCII character used as the escape character which
is by default +. Entering this escape character three times followed by a pause of at least the
Escape delay parameter below and then an AT command will cause the router to switch back
to command mode from online mode. This is equivalent to the S2 register setting.
Escape delay s milliseconds
The parameter in this text entry box defines the delay required between entering the escape
sequence (default +++) and the AT command in order for the router to drop back into
command mode. This is equivalent to the S12 register setting.
Related CLI commands
Entity
transip
transip
transip
transip
transip
transip
transip
transip

RealPort parameters

Digi devices use the patented RealPort COM/TTY port redirection for Microsoft Windows.
RealPort software provides a virtual connection to serial devices, no matter where they reside on
the network. The software is installed directly on the host PC and allows applications to talk to
devices across a network as though the devices were directly attached to the host. Actually, the
devices are connected to a Digi device somewhere on the network. RealPort is unique among
COM port re-directors because it is the only implementation that allows multiple connections to
multiple ports over a single TCP/IP connection. Other implementations require a separate TCP/IP
connection for each serial port. Unique features also include full hardware and software flow
control, as well as tunable latency and throughput. Access to RealPort services can be enabled or
disabled.
Digi TransPort User Guide
Instance Parameter
n port
n host
n remport
n keepact
n staycon
n cmd_echo_off
n escchar
n esctime
Values Equivalent Web Parameter
Valid port Listen on port
number
0 – 65535
Valid IP address Connect to IPaddress a.b.c.d or
a.b.c.d or Hostname
hostname
Valid port Port
number
0 – 65535
0 – 255 Send TCP Keep-Alives every s
seconds
ON,OFF Enable Stay Connected mode
ON,OFF Disable command echo
Valid ASCII Escape char c
character
0 – 255 Escape delay s milliseconds
Serial parameters
144