Transact Sql Commands - Digi TransPort User Manual

Set the Digi to use the backup IP address if the main database is unavailable.
ipbu 0 donext ON
For example, to configure and use a local backup database when the main SQL database
at 192.168.0.50 is offline, the configuration may look similar to this:
egroup 0 dbhost "192.168.0.50"
sql 0 dbsrvmem 200
sql 0 dbfile "sardb.csv"
sql 0 dbname "sarvpns"
sql 0 learn ON
sqlsave 0 backup.csv
ipbu 0 IPaddr "192.168.0.50"
ipbu 0 BUIPaddr "127.0.0.1"
ipbu 0 retrysec 30
ipbu 0 donext ON
Memory information
smem
Displays the amount of memory allocated, in use and available for use by the MySQL server on
the Digi.

Transact SQL commands

To query a SQL database manually using transact SQL statements, the following commands can
be used.
To connect to the SQL server and database:
sqlcon <host> <user> <pwd> <database>
For example:
sqlcon 192.168.0.50 sqluser sqlpass eroute-db
To issue transact SQL statements:
sqldo <"cmd">
For example:
sqldo "select * from site where subnet='10.110.100.0' limit 3"
To limit the sqldo command to only act on specified fields, the following command can be used:
sqlfields "<field1> <field2> <field3>"
For example:
sqlfields "remmsk password peerip"
After issuing the sqlfields command, all further sqldo commands will apply to these fields only.
When finished, to close the SQL server connection correctly:
sqlclose
If the database being queried is held locally on the Digi, these commands can be preceded with
the SQL debug command to give extra feedback on any commands issued.
Digi TransPort User Guide
Transact SQL commands
551