Advanced Default Route - Digi TransPort User Manual

If a particular route fails it will automatically have its metric set to 16 which means that it
istemporarily deemed as being out of service. The default out of service period is set by the IP
route out of service parameter. Note that this default period may be overwritten in certain
situations such as when a firewall stateful inspection rule specifies a different period. When a
route is out of service, any alternative routes (with matching subnets) will be used first.
Related CLI commands
Entity
def_route
def_route
def_route
def_route
def_route

Advanced Default route

Use metric n when the interface is not active
The value in this text box specifies the routing metric to use when the interface is not active.
Use this route only if the source IP address of the packet matches
When this checkbox is checked, the following two parameters are enabled.
IP address a.b.c.d
If necessary, these IP Address and Mask parameters may be used to further qualify the way in
Digi TransPort User Guide
Instance Parameter
n descr
n gateway
n ll_ent
n ll_add
n upmetric
Values Equivalent Web Parameter
Up to 20 characters Description
Valid IP address Gateway a.b.c.d
a.b.c.d
Blank,PPP,ETH,TUN Interface x,y
0 – 2147483647 Interface x,y
1 - 16 Metric
Default Route n parameters
216