Digi TransPort User Manual page 503

Ethernet 0 MAC Address
This describes the MAC address of the Ethernet 0 interface.
Firmware Version
This describes the firmware version that is currently running on the router.
SBIOS Version
This describes the SBIOS firmware version that is currently running on the router.
Build Version
This describes the build configuration of the firmware that is currently running on the router.
HW Version
This describes the hardware version on the router. Please note this item may be blank.
CPU Utilization
This describes the current and historical CPU utilization since the router booted up.
Up Time
This describes the amount of time since the router booted up.
Date and Time
This describes the current date and time on the router.
Total Memory
This describes the total amount of RAM that is fitted on the router.
Used Memory
This describes the amount of RAM that is currently being used on the router.
Free Memory
This describes the amount of RAM that is currently free on the router.
Mobile Module
This describes which mobile module is fitted on the router.
SW Opts
This describes which firmware options have been enabled on the router.
SW Cnts
This describes some configuration parameters that are used by firmware.
Switch Mode
This describes the current setting of the Ethernet switch on routers with multiple Ethernet
interfaces. It can be either "Hub" or "Port Isolate".
Digi TransPort User Guide 503