Digi TransPort User Manual page 418

The community string is echoed as dots in the text entry box and so having a second
confirmation field where the string is retyped, allows a simple check to be performed for
correct entry.
SNMPv3
Username
This field is the name of the SNMP user.
Authentication None, MD5, SHA1
These three radio buttons select what authentication algorithm is to be applied to the SNMP
transactions.
Authentication Password
This is the authentication password for the user.
Confirm Authentication Password
The authentication password is not shown as clear text. The confirmation box allows a simple
check that the password has been entered correctly.
Encryption None, DES, AES
These three radio buttons select which encryption (privacy) algorithm should be applied to the
SNMP data.
Encryption Password
The user's password that is used to control the privacy of the SNMP transactions is entered
into this text entry box.
Confirm Encryption Password
The encryption password is not shown as clear text. The confirmation box allows a simple
check that the password has been entered correctly.
Related CLI commands
Entity
snmpuser
snmpuser
snmpuser
snmpuser
snmpuser
snmpuser
SNMP Filter parameters
SNMP filters allow the system administrator to control access to the router MIBs via SNMP. This
functionality is controlled by a table on the web configuration page. This table has three columns,
Digi TransPort User Guide
Instance Parameter
n community
n name
n auth
n authPassword
n priv
n privPassword
Values Equivalent Web Parameter
public / private Community
user_dave Username
Off,MD5,SHA1 Authentication, None, MD5,
SHA1
my_password Authentication Password
Off,DES,AES Encryption, None, DES, AES
my_password Encryption Password
SNMP parameters
418