Nui Mappings Parameters; Nua / Nui Interface Mappings Parameters - Digi TransPort User Manual

Entity Instance
lapb n
lapb n
lapb n
lapb n
lapb n

NUI Mappings parameters

When a TPAD call is taking place the attached terminal sometimes only specifies an "NUI"
(Network User ID) to call. If the X.25 network requires an NUA instead of an NUI to determine the
destination of a call then the NUI Mappings table can be used to convert an NUI to an NUA.
If a TPAD call specifies a call in which the NUI matches an entry the call actually placed on the
network will contain the respective NUA and no NUI.
Related CLI commands
Entity
nuimap
nuimap

NUA / NUI Interface Mappings parameters

For PAD and TPAD instances, this table can be used to override the following:
• Interface
• Backup interface
• IP address
Digi TransPort User Guide
Parameter
mux_0710
mux_mode
dlc
asyport
virt_async
Instance Parameter
n nua
n nui
Values Equivalent Web Parameter
1 = enabled, 0 Mux 0710 mode
= disabled
0 = Basic, 1 = Mux mode
Error Recovery
0 - 63 DLC #
0 - 255 ASY port
0 - 255 Virtual ASY port
Values Equivalent Web Parameter
text Maps to NUA
text NUI
X.25 parameters
338