Table of Contents
Advertisement
Related CLI commands
Entity
event
event
SMS Messages parameters
This menu option has three identical rows, each of which controls the setting of the SMS alert
messages.
Note
The SMS Messages option is only available on routers with W-WAN capability.
Send SMS messages to
This field should contain the destination telephone number (MSISDN) for SMS alert messages.
The format for this field is the international dialing code followed by the number, but should
not contain a '+' prefix. For example, UK mobile 07871 445677 would be 447871445677
If the event priority is at least
This numeric input field sets the trigger level for the alert message. If, for example, this field is
set to the value 6, only events having a priority of 6 or higher will trigger an automated SMS
alert. Setting this field to 0 disables the sending of SMS alerts.
Use SMS template
This field contains the name of the template file that will be used to form the basis of any
alarm messages generated by the event logger. The default template file is a test file called
"EVENT.SMS" that is stored in the compressed .web file. A new template may be created, and if
named "EVENT.SMS" will take precedence over the pre-defined "EVENT.SMS" template but it is
recommended that a new name is used, such as "event1.sms". Templates should use the
".SMS" file extension.
Send a maximum of
This parameter limits the number of SMS alert messages sent by the router in any one day.
n
SMS messages have been sent today
This is a status message, indicating how many SMS alert messages have been sent during the
last 24-hour period.
Digi TransPort User Guide
Instance
Parameter
n
trap_trig
n
trap_max
n
n
SMS messages per day
Values
0 – 9
0 disables sending alerts
0 – 255
Event Settings parameters
Equivalent Web Parameter
Send a SNMP Trap when the
event priority is at least
Send a maximum of
n
SNMP
traps per day
n
383
Advertisement
Table of Contents
