Example Scenario - Digi TransPort User Manual

Hide thumbs Also See for TransPort:

Table of Contents

Example scenario:

A single configuration file is required for a range of DR6410 routers, there is a mix of 3 types of 3G

WWAN modules and some have GPRS modules installed. Different W-WAN modules need

different modemcc commands to correctly configure the ASY ports. All these modules can have

their own specific commands in one config file.

Example configuration using tagged sections:

Comments are in red and prefixed with a # symbol. Comments may be used in configuration files

to make them easier to read. The info_asy_add parameters are just for illustration purposes only

and are not the actual ASY port numbers used.

<DR6410-H0A>

#Start of DR6410-H0A config

<NOVATEL_3G>

#Start of Novatel specific config

modemcc 0 asy_add 7

modemcc 0 info_asy_add 8

#End of Novatel specific config

</NOVATEL_3G>

#Start of Option specific config

modemcc 0 asy_add 7

modemcc 0 info_asy_add 9

#End of Option specific config

</OPTION_3G>

#Start of Sierra specific config

modemcc 0 asy_add 7

modemcc 0 info_asy_add 10

#End of Sierra specific config

</SIERRA_3G>

#End of DR6410-H0A config

</DR6410-H0A>

<DR6410-E0A>

#Start of DR6410-E0A config

Digi TransPort User Guide

Do you have a question about the TransPort and is the answer not in the manual?