Wi-Fi Parameters - Digi TransPort User Manual

Related CLI commands
Command
eth
ethstat
at\mibclr=eth.n.stats n/a

Wi-Fi parameters

Module Detected
This indicates that the Wi-Fi hardware has been detected by the router.
Admin Status
The current administrative state of the Wi-Fi interface. It indicates whether there is sufficient
configuration to bring the Wi-Fi interface up. It can be either "Up" or "Down".
Operational Status
The current operational state of the Wi-Fi interface. It can be either "Up" or "Down".
Channel Mode
The Wi-Fi channel mode that is being used. The possible values for this parameter are "B/G"
and "A".
Channel
The Wi-Fi channel that is being used.
Bytes Received
The number of bytes that have been received on the Wi-Fi interface.
Bytes Sent
The number of bytes that have been sent on the Wi-Fi interface.
Packets Received
The number of packets that have been received on the Wi-Fi interface.
Packets Sent
The number of packets that have been sent on the Wi-Fi interface.
Receive Errors
The number of receives errors have occurred on the Wi-Fi interface.
Transmit Errors
The number of transmit errors have occurred on the Wi-Fi interface.
Received Packets Dropped
The number of received packets have been dropped on the Wi-Fi interface.
Digi TransPort User Guide
Instance Parameter
n status
n n/a
n/a
Equivalent Web Parameter
Displays the current configuration and
status of Ethernet interface n.
Displays the statistics for Ethernet
interface n.
Clears the statistics for Ethernet interface
n.
Wi-Fi parameters
452