Adjusting A Paper Drawer To Hold A Different Paper Size - Canon CLC5151 Reference Manual

IMPORTANT
You will not be able to make copies or print if you load paper that exceeds the loading limit, or if
the paper drawer is not completely pushed into the machine. Always check that the paper
drawers are in place, and that the paper does not exceed the loading limit.
NOTE
If paper runs out during copying or printing, load a new paper stack, and follow the instructions
on the touch panel display. The machine automatically restarts, and produces the remaining
copies or prints.

Adjusting a Paper Drawer to Hold a Different Paper Size

If you want to load a different paper size into a paper drawer, follow the procedure described
below to adjust the paper drawer guides.
IMPORTANT
Only A4 or A4R transparencies can be used. Make sure that the paper size slide is set to 'A4' or 'A4R'
when loading transparencies in a paper drawer. If transparencies of a different size (other than A4
or A4R) are loaded in a paper drawer, the paper size and remaining amount of paper will not be
detected correctly.
1
Press and release the button on the paper drawer that you want to
adjust. Grip the handle, and pull out the paper drawer until it stops.
Remove all of the remaining paper.
7-7
Paper Drawers
7