Adjusting A Drawer To Hold A Different Paper Size - Canon 1100 Reference Manual

5
Gently push the drawer back into the copier until it clicks.
CAUTION
•
Be careful not to catch your fingers between the drawer and the copier.
IMPORTANT
•
You will not be able to make copies if you load paper beyond the loading limit or if the drawer is not
completely pushed into the copier. Always check that drawers are in place and if a drawer is
overloaded, decrease the amount of paper to the loading limit.
6
Press [Done].
3

Adjusting a Drawer to Hold a Different Paper Size

If you want to load a new paper size into a drawer, follow the procedure described below to
adjust the drawer guides.
NOTE
•
Drawer 2 can be adjusted to hold paper of A3, A4, and A4R sizes.
•
Drawer 1 is not adjustable and cannot accommodate different paper sizes.
1
Press and then release the button of Drawer 2.
Gently press the button all the way to the back. If you do not press the button all the way, you may not
be able to pull the drawer out. In this case, push the drawer back in and press the button again.
3-6
Loading Paper