Technical Specifications - Mediant 2000; Mediant 2000 Selected Technical Specifications - AudioCodes Mediant 2000 User Manual

User's Manual
10

Technical Specifications - Mediant 2000

10.1

Mediant 2000 Selected Technical Specifications

The table below includes selected technical specification for both wireline and wireless
application support.
Item
Channel Capacity
Network Ports/DSP Calls
(independent digital voice, fax or
data ports)
DSP Channel Configuration
Options
Voice Messaging
Playback from Local Storage
Media Processing
IP Transport
DTMF/MF Transport
Voice Processing
Output Gain Control
Version 5.0
Table 10-1: Selected Technical Specifications
Characteristic
Wireline: Up to 480
Wireless: Up to 480 - UMTS; 360 - CDMA, EVRC (IS-127)
All media processing ports can be tied to IP-RTP, PSTN-DS0
Time Slots independently
60, 120, 240, 480 ports
Prompts and announcements playback (10 MB integral memory
for 20 min. of G.711 or 200 min. for G.723 recorded prompts)
VoIP (RTP/ RTCP) per IETF RFC 3550 and RFC 3551
DTMF/MF RTP Relay per RFC-2833, Mute, Transparent (transfer
in coder as voice)
DTMF Relay per I.366.2, Mute, transfer in coder as voice
All voice processing features are supported simultaneously on all
ports
Dynamic Network Jitter Buffer with reordered RTP packets
correction
Call Progress Tones generation and detection
Transcoding of a G.711 RTP stream to any Low Bit-Rate Coder
RTP stream using one DSP channel resource
Mediation between two IP endpoints of the same coder without
using any DSP channel resource
Media duplication (one source to many destinations) using the
same coder without using additional DSP channel resources
Programmable: -31 dB to +31 dB in steps of 1 dB
10. Technical Specifications - Mediant 2000
285 June 2006