Selected Technical Specifications; Mp-11X Specifications; Table 10-1: Mp-11X Functional Specifications - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
10

Selected Technical Specifications

The main technical specifications of the MP-11x and MP-124 devices are listed in the
following subsections.
Note:
10.1

MP-11x Specifications

The table below lists the main technical specifications of the MP-11x.
Function
Channel Capacity
Available Ports
MP-11x/FXS Functionality
FXS Capabilities
MP-11x / FXO Functionality
FXO Capabilities
(Note: Applicable only to
MP-114 & MP-118)
Version 5.4
All specifications in this document are subject to change without prior notice.

Table 10-1: MP-11x Functional Specifications

MP-112: 2 ports*
MP-114: 4 ports
MP-118: 8 ports
* The MP-112 differs from the MP-114 and MP-118. Its configuration
excludes the RS-232 connector, the Lifeline option and outdoor protection.
Short or Long Haul (Automatic Detection): Ringer Equivalency Number
(REN) 3 per FXS port - up to 9 km (30,000 feet) using a 24-AWG line.
Note: The lines have been tested under the following conditions: ring
voltage greater than 30 Vrms; offhook loop current greater than 20 mA
(all lines ring simultaneously)
Lightning and high voltage protection for outdoor operation
Caller ID generation: Bellcore GR-30-CORE Type 1 using Bell 202
FSK modulation, ETSI Type 1, NTT, Denmark, India, Brazil, British and
DTMF ETSI CID (ETS 300-659-1)
Programmable Line Characteristics: Battery feed, line current, hook
thresholds, AC impedance matching, hybrid balance, Tx & Rx
frequency response, Tx & Rx Gains
Note: For a specific coefficient file, please contact AudioCodes.
Configurable ringing signal: up to four cadences and frequency from
15 to 200 Hz
Loopback for testing and maintenance
Short or Long Haul
Lightning and high voltage protection for outdoor operation
Programmable Line Characteristics: AC impedance matching, hybrid
balance, Tx & Rx frequency response, Tx & Rx Gains, ring detection
threshold, DC characteristics
Note: For country-specific coefficients, use the parameter
CountryCoefficients.
Caller ID detection: Bellcore GR-30-CORE Type 1 using Bell 202 FSK
10. Selected Technical Specifications
Specification
377 May 2008