Selected Technical Specifications; Mp-11X Specifications - AudioCodes MediaPack MP-11X User Manual

SIP User's Manual
9

Selected Technical Specifications

The main technical specifications of the MP-11x and MP-124 gateways are listed in the
following subsections.
Note:
9.1

MP-11x Specifications

Function
Channel Capacity
Available Ports
MP-11x/FXS Functionality
FXS Capabilities
Version 5.2
All specifications in this document are subject to change without prior notice.
Table 9-1: MP-11x Functional Specifications
MP-112: 2 ports*
MP-114: 4 ports
MP-118: 8 ports
* The MP-112 differs from the MP-114 and MP-118. Its configuration
excludes the RS-232 connector, the Lifeline option and outdoor
protection.
Short or Long Haul (Automatic Detection):
REN2: Up to 10 km (32,800 feet) using 24 AWG line
REN5: Up to 3.5 km (11,400 feet) using 24 AWG line
Note: The lines have been tested under the following conditions: ring
voltage greater than 30 Vrms; offhook loop current greater than 20 mA
(all lines ring simultaneously).
Lightning and high voltage protection for outdoor operation.
Caller ID generation: Bellcore GR-30-CORE Type 1 using Bell 202 FSK
modulation, ETSI Type 1, NTT, Denmark, India, Brazil, British and DTMF
ETSI CID (ETS 300-659-1)
Programmable Line Characteristics: Battery feed, line current, hook
thresholds, AC impedance matching, hybrid balance, Tx & Rx frequency
response, Tx & Rx Gains
Note: For a specific coefficient file, please contact AudioCodes.
Configurable ringing signal: up to three cadences and frequency 15 to
200 Hz.
Over-temperature protection for abnormal situations as shorted lines
Loop-backs for testing and maintenance
9. Selected Technical Specifications
Specification
381 August 2007