Leica FlexLine TS02 User Manual page 206

Applications
Measure traverse -
Sight foresight
Interrupt a set
CONTINUE WITH...
Field Description
Desc. Description of the backsight point.
Stat. ID Name of the station.
Code Point code, if desired.
Next step
Depending on the traverse method configured, after the measurement either the
Sight Backsight Point screen stays active for measuring the backsight point in a
second face, or the Sight Foresight Point screen appears for measuring the
foresight point.
Next step
Depending on the traverse method configured, after the measurement either the
Sight Foresight Point screen stays active for measuring the foresight point in a
second face, or the Sight Backsight Point screen appears for measuring the
backsight point.
To interrupt a set, press ESC to exit the backsight or foresight screen. The CONTINUE
WITH.... screen will appear.
Field Description
Redo last Returns to last measured point, can be either a backsight or a
measurement foresight point. The last measurement is not stored.
FlexLine, 206