Leica FlexLine TS02 User Manual page 92

Coding
Quick coding
step-by-step
Messages
FlexOffice
1. Press Q-CODE.
2. Enter a two digit number on the keypad.

A two digit code must always be entered on the keypad even if only a
one digit code was assigned.
For example: 4 -> enter 04.
3. The code is selected, the measurement triggered and the measured data and
code saved. The name of the selected code is displayed after the measurement.
4. Press Q-CODE again to end quick coding.
The following are important messages or warnings that may appear.
Messages
Attrib. cannot be changed ! Attribute with fixed status cannot be changed.
No codelist available !
Code not found !
Codelists can be easily created and uploaded to the instrument using the supplied
FlexOffice software.
Description
No codelist in memory. Manual input for code and
attributes are called automatically.
No code is assigned to the entered number.
FlexLine, 92