Construction; Starting Construction - Leica FlexLine TS02 User Manual

Applications
9.10
9.10.1
Availability
Description
Access

Next step

Construction

Starting Construction


Construction is an application used to define a construction site by combining set-up
of the instrument along a construction line, measuring and staking out points in
relation to the line.
1. Select Prog from the MAIN MENU.
2. Select Construction from the PROGRAMS menu.
3. Select Set EDM: to set the EDM settings. Refer to "4.2 EDM Settings".
4. Select:
• New construction line - To define a new construction site, or
• Continue previous site - To continue with a previous construction site (skips
set-up).
If coordinates were entered by ENH and measured to known points, a plausibility
check displays the calculated line length, the actual length and the difference.
Measure to the line start and end points and the LAY-OUT screen appears.

FlexLine, 156
