Leica FlexLine TS02 User Manual page 226

Data Management



Exportable job data
formats
A '+', '-', '.' or alphanumerical characters should not be used as delimiter values in
ASCII files. These characters can also be part of the point id or coordinate values and
if so, will generate errors where they occur in the ASCII file.
Road data, Format and Backup data types, and the ASCII data format, are only
available for data exports to a USB memory stick, not via the RS232 serial interface.
All jobs, formats, codelists and configurations will be stored in the backup folder
created on the USB memory stick. The job data will be stored as individual database
files for each job, which can then be imported again. Refer to "10.3 Importing Data".
Job data can be exported from a job in dxf, gsi, csv and xml file types, or any other
user defined ASCII format. A format can be defined in FlexOffice Format Manager.
Refer to the online help of FlexOffice for information on creating format files.
4. Define the delimiter value and
the data fields of the file and
press OK. A message will display
confirming the successful export
of data.
FlexLine, 226