Check & Adjust
11.4
Description
Access
Messages
Measurement Error.
Try again.
Time limit exceeded !
Please repeat
adjustment !
Adjusting the Tilting Axis Error
The tilting axis error is caused by the deviation between the mechanical tilting axis
and the line perpendicular to the vertical axis. This error affects horizontal angles. To
determine this error, it is neccessary to point to a target located significantly below
or above the horizontal plane.
The horizontal collimation error has to be determined before starting this procedure.
1. Select Tools from the MAIN MENU.
2. Select Adjust from the TOOLS MENU.
3. Select Tilt Axis.
Description
Measurement error appears when, for example, there is an
unstable set up. Repeat the process. Confirmation of the
message required.
Time difference between measurements for results storage
exceeds 15 minutes. Repeat the process. Confirmation of
the message required.
FlexLine, 242