Leica FlexLine TS02 User Manual page 64

Setting
Field Description
Baudrate Speed of data transfer from receiver to device in bits per second.
1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200
Databits Number of bits in a block of digital data.
7
8
Parity Even
Odd
None
Endmark CR/LF
CR
Stopbits 1
Acknowlge On
Off
Data transfer is realised with 7 databits.
Data transfer is realised with 8 databits.
Even parity. Available if data bit is set to 7.
Odd parity. Available if data bit is set to 7.
No parity. Available if data bit is set to 8.
The terminator is a carriage return followed by a line feed.
The terminator is a carriage return.
Number of bits at the end of a block of digital data.
Acknowledgement expected from other device after data
transfer received. An error message will display if no
acknowledgement is returned.
No acknowledgement expected after data transfer.
FlexLine, 64