Access
Next step
9.6.2
Description
Applications
•
Line & offset
•
Stakeout (Point, Arc, Chord, Angle)
1. Select Prog from the MAIN MENU.
2. Select Reference Element from the PROGRAMS menu.
3. Complete application pre-settings. Refer to "8 Applications - Getting Started".
4. Select RefArc.
Define the reference arc.
Defining the Reference Arc
The reference arc can be defined by;
•
a center point and start point,
•
a start point, end point, and radius, or
•
by three points.
All points can be either measured, manually entered, or selected from the memory.
FlexLine, 135