Leica FlexLine TS02 User Manual page 171

Chainage and
method
Applications
4. When the element has been defined the ROAD 2D - MAIN PAGE appears.
Enter the chainage values and press:
• STAKE: to select the point and offset (center, left or right), to stake out and
start the measurement. The correction from actual point to stake out point is
shown on the display.
• MEASURE: to measure, or select points from memory, to calculate the chainage,
line and offset from the defined element.
B
TSOX_112
A
Spiral type
A Spiral in
B Sprial out
FlexLine, 171