Leica FlexLine TS02 User Manual page 98

Applications - Getting Started
Access

Station orientation calculation
P3
P0
TSOX_025
Select Station Setup in Pre-settings screen.
Next step
The Station Setup application begins. Refer to "9.2 Station Setup" for information on
the Station Setup process.
If no station was set and an application was started, or if in Q-Survey and a
measurement was recorded, then the last station is set as the current station and
the current horizontal direction is set as the orientation.
P2
Hz1
P1
P0 Instrument station
Known coordinates
P1 Target point
P2 Target point
P3 Target point
Calculations
Hz1 Station orientation
FlexLine, 98