Leica FlexLine TS02 User Manual page 78

Functions
Enter offet values
Field Description
Trav. Perpendicular offset. Positive if the offset point is to the right of the
Offset measured point.
Length Longitudinal offset. Positive if the offset point is further away than the
Offset measured point.
Height Height offset. Positive if the offset point is higher than the measured
Offset point.
Mode Period for which the offset is to apply.
Reset after
REC
Permanent
RESET
To reset offset values to 0.
CYLNDER
To enter cylindrical offsets.
The offset values are reset to 0 after the point is saved.
The offset values are applied to all further
measurements.
FlexLine, 78