Leica FlexLine TS02 User Manual page 193

Slope Type
Slope Grade
Applications
Left up Hinge point
Left down
Ratio of the slope. The unit for slope grade is defined in the SETTINGS screen. Refer
to "4.1 General Settings".
Next step
Press OK to proceed to the SLOPE STAKEOUT screen.
Right up Left up
Creates an upward plane extending to
the left of the defined hinge point.
Right up
Creates an upward plane extending to
the right of the defined hinge point.
Left down
Creates a downward plane extending to
the left of the defined hinge point.
Right down
Right down
Creates a downward plane extending to
the right of the defined hinge point.
FlexLine, 193