Leica FlexLine TS02 User Manual page 29

Direct search
Wildcard search
Examples of point
searches
User Interface
By entering an actual point number, for example 402, and pressing SEARCH, all
points within the selected job and with the corresponding point number are found.
The wildcard search is indicated by a "*". The asterisk is a place holder for any
following sequence of characters. Wildcards should be used if the point number is
not fully known, or to search for a batch of points.
* All points are found.
A All points with exactly the point number "A" are found.
A* All points starting with "A" are found, for example, A9, A15, ABCD, A2A.
*1 All points containing only one "1" are found, for example, 1, A1, AB1.
A*1 All points starting with "A" and containing only one "1" are found, for
example, A1, AB1, A51.
SEARCH
To search for matching points within
the selected job.
ENH=0
To set all ENH coordinates for the
point ID to 0.
FlexLine, 29