12.3
Objective, eyepiece
and reflectors
Fogging of prisms
Damp products
Cables and plugs
Care and Transport
Cleaning and Drying
•
Blow dust off lenses and prisms.
•
Never touch the glass with your fingers.
•
Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol. Do not use other liquids; these may attack the
polymer components.
Prisms that are cooler than the ambient temperature tend to fog. It is not enough
simply to wipe them. Keep them for some time inside your jacket or in the vehicle to
allow them to adjust to the ambient temperature.
Dry the product, the transport container, the foam inserts and the accessories at a
temperature not greater than 40°C /104°F and clean them. Do not repack until
everything is completely dry. Always close the transport container when using in the
field.
Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting
cables.
FlexLine, 251