Start Up & Power Down - Leica TPS1200+ Field Manual

19.6 Start Up & Power Down
Description
Access
CONFIGURE
Start Up & Power
Down
Start Up & Power
Down
page
122
• The settings on this screen:
• define the behaviour of the instrument for a general start up.
• define the behaviour of the instrument when starting up after a power loss.
• define a PIN code which needs to be typed in on starting up the instrument. A
PIN is a Personal Identification Number.
Select Main Menu: Config...\General Settings...\Start Up & Power Down.
Description of fields
Field
General settings
<Start Screen:>
<Power Down:>
Auto Power Down Behaviour settings
<Mode:>
<After Time:>
SmartAntenna settings
<Switch Off:>
Power settings for Device on Port 2
<Switch On:>
Next step
CONT (F1) changes to the PIN Code page.
Option Description
Choicelist Determines the first screen which is
shown after turning on the instrument.
With
Sets the behaviour of the instrument shut
Confirmation or
down.
Directly
Turn Off or
The instrument turns off or does not
Remain On
power down if no events have occurred.
Available unless <Mode: Remain On> is
User input
selected. Minutes after which the instru-
ment should turn off.
Choicelist This option determines when Smart-
Antenna is turned off. The selected time is
activated whenever SmartStation leaves
GPS mode.
This option is directly linked to <Switch
Off:> in CONFIGURE Logging of Raw
Obs. Refer to "23.6 Logging of Raw Obs"
for details.
If Device Found
Devices attached to port 2 are automati-
cally powered up.
If ATX Found
SmartAntenna attached to port 2 is auto-
matically powered up.
TPS1200+
Config...\General Settings...