Leica FlexLine TS02 User Manual page 141

Stake out angle
Access
Stake out point,
arc, chord or angle
Applications
To stake out a series of points along the arc defined by the angle segments from the
center point of the arc.
P3
P2
b
b
b
a
P1
TSOX_045
1. Press STAKE from the REFERENCE ARC - MAIN PAGE screen.
2. Select one of the four methods of stake out available.
Enter the stake out values. Press PT -/PT + to toggle through the calculated stake out
points.
Field Description
Distrb. For stakeout arc: Method of misclosure distribution. If the entered arc
length is not an integer of the whole arc, there will be a misclosure.
None
Equal
P4
P0
P1
P2
P3
P4
a
P0
b
All of the misclosure will be added to the last arc-section.
The misclosure will be equally distributed between all
sections.
Center point of arc
Start point of arc
Stake out point
Stake out point
End point of arc
Radius of arc
Angle
FlexLine, 141