Leica FlexLine TS02 User Manual page 35

Change the
intensity of the
laser plummet
Position over pipes
or holes
Operation
External influences and the surface conditions may require the adjustment of the
intensity of the laser plummet.
Min 50%
TSOX_092
TSOX_014
In the Level/Plummet screen, adjust the
intensity of the laser plummet using the
navigation key.
The laser can be adjusted in 25% steps as
required.
Max
Under some circumstances the laser dot
is not visible, for example over pipes. In
this case, using a transparent plate
enables the laser dot to be seen and then
easily aligned to the center of the pipe.
FlexLine, 35