Station Setup Results - Leica FlexLine TS02 User Manual

Applications
9.2.3
Computation
procedure
Access
STATION SETUP
RESULT

Station Setup Results

The computation of the station position is done via the Method selected in Enter
Station Data.
If more than the minimum required measurements are performed, the procedure
uses a least squares adjustment to determine the 3D position and averages
orientation and height measurements.
• The original averaged face I and face II measurements are used for the
computation process.
• All measurements are treated with the same accuracy, whether these are
measured in single or dual face.
• Easting and Northing are determined by the least squares method, which
includes standard deviation and improvements for horizontal direction and
horizontal distances.
• The final height (H) is computed from averaged height differences based on the
original measurements.
• The horizontal direction is computed with the original averaged face I and face II
measurements and the final computed plan position.
Press F4 Compute in the Accuracy Results screen.
This screen displays calculated station coordinates. The final computed results
depend on the Method selected in Enter Station Data.
Standard deviations and residuals for accuracy assessments are provided.
FlexLine, 104