Surveying - Leica FlexLine TS02 User Manual

Applications
Next step
9.3
Availability
Description
Messages
Invalid data - no height
computed!
Face I - II limit
exceeded!
No data measured!
Measure point again!
Press SET to set the station coordinates and/or orientation and return to the
PROGRAMS menu.

Surveying


Surveying is an application used for the measurement of an unlimited number of
points. It is comparable to Q-Survey from the MAIN MENU, but includes pre-settings
for the job, station and orientation prior to beginning a survey.
Description
Either the target height is invalid or insufficient
measurements are available to compute a final station
height.
This error occurs if a point was measured in one face and
the measurement in the other face differs by more than
the specified accuracy limit for the horizontal or vertical
angle.
There is insufficient data measured to be able to compute
a position or height. Either there are not enough points
used or no distance measured.

FlexLine, 108
